- Home
- About Us
-
SIW Product / Service
- SIW Product / Service
- Product
- Service
- Certification / Standard
- Sustainability
- News
- Work With Us
- Contact Us
-
Font Size
- S
- M
- L
Special Grade Earthquake-Resistant PC Strand - "A Safety Standard for Life Beyond Strength"
In an earthquake situation, the very seconds when a structure begins to fail can determine life or death. Therefore, designing structures to delay "Collapse" becomes a critical factor in ensuring enough time for safe evacuation.
At Siam Industrial Wire (SIW), we place great emphasis on every mechanical property of PC Strand, recognizing its importance as a key component in civil engineering design. Our special earthquake-resistant PC Strand is developed with a higher "Force Ratio" than standard products.
• Force Ratio (the ratio between Breaking Load and Yield Load) in SIW’s PC Strand is higher than standard grades, meaning the steel does not fail immediately after reaching its yield point.
• This allows the structure to withstand seismic forces longer, effectively "delaying" Collapse and giving occupants valuable time to evacuate safely.
• Additionally, the increased "Plastic Deformation" of steel enabled by the high Force Ratio makes the product suitable for plasticity-based structural design, which emphasizes "Ductile Behavior".
• And when exposed to seismic forces, this ductility causes serious and visible "Cracking" before total collapse occurs, serving as a warning sign that allows for timely intervention or evacuation.
• It also helps reduce the risk of Nature Abrupt or sudden Collapse as plasticity-based design lowers the chance of instant concrete brittle failure — which in turn increases the likelihood of survival and reduces potential loss.
SIW manufactures and exports special-grade PC Strand with a higher Force Ratio than standard requirements to Denmark, conforming to FprEN 10138-1&-3:2009 standards. These products are certified with the FI Marking of Denmark.
At SIW, we are deeply aware of the impacts of natural disasters and the value of every life.
08-06-2022
SIW ทำธุรกิจด้วยหลัก ESG ที่พาองค์กรเติบโตและยั่งยืน มีการดำเนินการในด้าน Environment, Social and Governance (ESG) ตลอดระยะเวลาการดำเนินธุรกิจของบริษัทฯ การดำเนินกิจกรรมด้านสังคม Social เพื่อแสดงความมุ่งมั่นเรื่องความรับผิดชอบต่อสังคมทั้งภายในและภายนอกองค์กรโดยบริษัทได้รับการรับรองมาตรฐาน ISO 45001, TIS 18001, มรท 8001 และ CSR-DIW ตลอดถึงส่งเสริมการมีส่วนร่วมและการปรึกษาหารือของพนักงานและชุมชน มีการดำเนินงานการให้ปรับปรุง-เสริมสร้างความตระหนักความปลอดภัยแก่พนักงาน การให้ความรู้ให้แนวทางการดำเนินธุรกิจกับผู้ประกอบการและชุมชน การบริจาคให้กับการสร้างห้องสมุด การมอบทุนการศึกษาให้กับสถานศึกษาที่ตั้งอยู่ในพื้นที่ใกล้เคียงกับบริษัท การสร้างกิจกรรมสำนึกบ้านเกิดของพนักงาน ในด้านสิ่งแวดล้อม Environment บริษัทได้รับการรับรองมาตรฐาน ISO 14001, ISO 50001, Product carbon footprint label และ Environmental Product Declarations (EPD) โดยในทุกปีบริษัทมีการจัดทำมาตรการด้านสิ่งแวดล้อม มาตรการอนุรักษ์พลังงาน มาตรการ Low Emission Support Scheme (LESS) เพื่อลดผลกระทบต่อสิ่งแวดล้อมจากการดำเนินธุรกิจ ตลอดถึงมุ่งมั่นการลดภาวะโลกร้อนอันเกิดจากก๊าซเรือนกระจก สำหรับในด้านสิ่งแวดล้อมนี้บริษัทอยู่ระหว่างขยายความสามารถดำเนินโครงการ Carbon Border Adjustment Mechanism (CBAM) ในด้านธรรมาภิบาล Governance บริษัทได้รับการรับรองมาตรฐาน ISO 9001, ISO/IEC 17025, NATA-ISO/IEC 17025 และมาตรฐาน Product certificate จากแต่ละประเทศมากกว่า 25 มาตรฐานการรับรองผลิตภัณฑ์ อาทิ TIS, UK CARES, DCL, ASTM, JIS, MS, NZ และ AS เป็นต้น เป็นการสร้างความมั่นใจให้กับลูกค้า คู่ค้า และหน่วยงานราชการ ว่าบริษัทสามารถผลิตสินค้าและให้บริการอย่างมีคุณภาพสอดคล้องมาตรฐานสากล ส่งผลให้บริษัทได้รับความไว้วางใจกับคู่ค้ามากกว่า 50 ประเทศจากทั่วโลก และบริษัทมีการดำเนินโปรแกรมการพัฒนาความรู้ ความสามารถของพนักงานอย่างเป็นรูปธรรมและเป็นระบบผ่านกระบวนการ QCC ซึ่งในทุกปีพนักงานของบริษัทที่ผ่านการพัฒนาความรู้ QCC นี้ สามารถส่งผลงานเข้าประกวดนำเสนอผลงานในระดับประเทศ และนานาชาติ แล้วสามารถได้รับรางวัลระดับ Gold ได้ทุกปี เป็นที่ภาคภูมิใจของพนักงาน ครอบครัวของพนักงาน และองค์กร
06-05-2025
Here is the English translation of your full FAQ content: Frequently Asked Questions (FAQ) 1. What products does SIW manufacture?Siam Industrial Wire Co., Ltd. (SIW) manufactures and distributes high-quality prestressed steel wire products for construction and industrial applications. The main products include: PC Strand: High-tensile 7-wire strand for prestressed concrete, used in bridges, building structures, and precast slabs. PC Wire: High-tensile single wire ideal for smaller prestressed concrete applications, such as piles and floor slabs. Wire Mesh: Ready-to-use welded steel mesh for general concrete reinforcement, such as roads and building floors. Cold Drawn Wire: Low-carbon steel wire used for concrete reinforcement and further processing, e.g., tying wire. Spring Wire: High-quality spring wire used in the automotive, furniture, and machinery industries. 2. What certifications do SIW products have?SIW products are certified to international quality standards in more than 70 countries worldwide, including: Thai Industrial Standard (TIS) ASTM (United States) JIS (Japan) ISO/IEC 17025 by NATA (Australia) for the internal testing center Read more: https://www.siw.co.th/en/iso-standard 3. Does SIW offer product testing services?Yes. SIW has a state-of-the-art testing center certified to ISO/IEC 17025 by NATA (Australia), equipped with: Fatigue Testing Machine: For testing material fatigue Relaxation Testing Machine: For stress relaxation testing of wires Supports testing to various international standards such as AS/NZS, ASTM, BS, ISO, JIS, and TIS. Read more: https://www.siw.co.th/en/news-detail/testing-services 4. How long has SIW been in the industry?SIW was established in 1994 and has over 30 years of experience in steel wire production. The company has grown steadily and formed joint ventures with leading companies such as Nichia Steel Works (Japan) and is part of the Tata Steel Group. 5. In which countries does SIW have customers?SIW serves customers and partners in many regions worldwide, including: Thailand Australia Taiwan The Philippines Indonesia And over 60 countries that trust in the quality of SIW’s products and services. Read more: https://www.siw.co.th/th/iso-standard 6. What are SIW’s sustainability and CSR policies?SIW emphasizes sustainability and continuously carries out social contribution projects, such as: Supporting people with disabilities and the elderly in communities SIW We Care: COVID-19 relief project Scholarships for well-behaved youth SIW English Camp: English language development Reforestation campaign: “Planting Trees, Planting Life for the King” Green Market: Supporting local entrepreneurs and communities Read more: https://www.siw.co.th/en/sustainability 7. How can I contact SIW?You can reach SIW through the following channels: Website: www.siw.co.th/en Head Office:Rasa Tower A, 14th Floor, 555 Phahonyothin Road, Chatuchak, Bangkok 10900, Thailand Factory:160 Moo 11, Nong Lalok Subdistrict, Ban Khai District, Rayong 21120, Thailand Phone: +66 2937 0060 Email: marketing@siw.co.th 8. What domestic projects has SIW participated in?SIW has been involved in major construction and infrastructure projects across Thailand, such as: Mass transit and railway systems Expressways and river-crossing bridges High-rise buildings and real estate developments Industrial plants and warehouses Read more: https://www.siw.co.th/en/project 9. What international projects has SIW worked on?SIW exports products for use in international projects, including: Bridge and port projects in Australia Commercial buildings in Taiwan Infrastructure in the Philippines and Indonesia Public transportation systems in the Middle East Read more: https://www.siw.co.th/en/project 10. What are the ordering channels?Customers can request quotations through: Filling out the form on the website: https://www.siw.co.th/en/contact-us Emailing: marketing@siw.co.th Calling the sales department directly 11. What if the wire has a problem? How do I make a claim?Customers can report product claims by: Filling out the form at: https://www.siw.co.th/en/contact-us Sending an email to: marketing@siw.co.th Contacting the sales or technical service department directly Checking the status online via SIW’s LINE Official Account: https://lin.ee/AJotXBNI 12. How can I check product status?You can track your product status by: Contacting the sales department directly Contacting the technical service team Checking status online via LINE Official Account: https://lin.ee/AJotXBNI
07-08-2023
Surface corrosion and pitting corrosion differ in the following ways: Surface Corrosion: Surface corrosion refers to the corrosion that occurs on the surface of a metal, where the metal surface is not deeply eroded or penetrated by corrosion to the extent that it becomes pitted or significantly damaged. Pitting Corrosion: Pitting corrosion is corrosion that develops on the metal surface over an extended period, causing the metal surface to be deeply eroded and penetrated into the metal substrate. This leads to significant damage to the metal, rendering it unsuitable for use. Corrosion Mechanism:When a metal undergoes oxidation or is subjected to reduction, the corrosion process takes place, resulting in the erosion of the metal. Therefore, the primary goal of corrosion prevention is to inhibit the occurrence of oxidation reactions. The most resistant metals to corrosion are those with the highest positive electrode potentials, such as gold. Platinum, silver, and red gold also possess good resistance to corrosion due to their relatively high positive electrode potentials. On the other hand, other metals are more susceptible to oxidation, meaning they are more likely to corrode easily. An example of a commonly encountered and distinct corrosion process is the formation of rust on iron or the creation of iron oxide. Iron corrodes when there is the presence of oxygen and water. The corrosion process of iron is relatively complex and has unique characteristics. However, it is believed to involve critical steps, including: 1. Oxidation reaction occurs at a specific area on the iron surface, acting as the anode. This can be represented by the equation: Fe(s) Fe2+(aq) + 2e-2. Oxygen is reduced at another area of the iron surface, acting as the cathode. In the presence of water, the equation becomes: 2O2(g) + 4H2O(l) + 8e- 8OH-(aq)3. A subsequent reaction involves the formation of iron hydroxide: 4Fe2+(aq) + 8OH-(aq) 4Fe(OH)2(aq) These steps contribute to the formation of iron oxide, commonly known as rust, and the overall corrosion process of iron. It's important to note that the corrosion mechanisms and reactions can vary based on the specific metal, environment, and conditions involved.
16-08-2024
Now Open!! SIW-Testing Service Center for Prestressed Steel Wire Quality Testing Perfect for manufacturers or users of PC Wire and PC Strand who require quality test results according to various standards. With over 30 years of expertise, SIW’s lab specializes in prestressed steel wire quality testing. Convenient, Fast, and Cost-effective ISO/IEC 17025 certified by NATA (National Association of Testing Authorities, Australia) Detailed, Clear, and Traceable Reports at Every Step, with Analysis and Improvement Suggestions Modern Equipment with High Efficiency and Precision of Over 99.95% Flexible Testing Customization Based on Client Requirements, Including Specific Tests Service Information: 1. Fatigue Testing Machine Brand: Zwick Roell, Model: HA500 Testing Standards Supported: AS/NZS 4672.1, AS/NZS 4672.2, BS 5896, LNEC E 542, LNEC E 453, ISO 15630 Part 3, TIS 95-2540, TIS 420-2540 PC Wire: Maximum Load 500 kN, Sample Diameter 5 – 22 mm PC Strand: Maximum Load 500 kN, Sample Diameter 5 – 22 mm Deformed Bar: Maximum Load 500 kN, Sample Diameter 5 – 40 mm 2. Relaxation Testing Machine Testing Standards Supported: AS/NZS 4672.1, AS/NZS 4672.2, ASTM A416/A416M, ASTM A421/A421M, ASTM A881, BS 5896, ISO 15630-3, JIS G3536, TIS 95-2540, TIS 420-2540 PC Wire: Maximum Load 300 kN, Sample Diameter 4 – 9 mm PC Strand: Maximum Load 500 kN, Sample Diameter 9.3 – 18.0 mm Service fees for wire testing by the Testing Service Center Why Choose SIW - Testing Service Center Contact Us: >>Click<<
06-05-2025
SIW-Testing Service Center for Prestressed Steel Wire Quality TestingPerfect for manufacturers or users of PC Wire and PC Strand who require quality test results according to various standards. With over 30 years of expertise, SIW’s lab specializes in prestressed steel wire quality testing.Convenient, Fast, and Cost-effectiveISO/IEC 17025 certified by NATA (National Association of Testing Authorities, Australia)Detailed, Clear, and Traceable Reports at Every Step, with Analysis and Improvement SuggestionsModern Equipment with High Efficiency and Precision of Over 99.95%Flexible Testing Customization Based on Client Requirements, Including Specific TestsService Information:1. Fatigue Testing MachineBrand: Zwick Roell, Model: HA500Testing Standards Supported: AS/NZS 4672.1, AS/NZS 4672.2, BS 5896, LNEC E 542, LNEC E 453, ISO 15630 Part 3, TIS 95-2540, TIS 420-2540PC Wire: Maximum Load 500 kN, Sample Diameter 5 – 22 mmPC Strand: Maximum Load 500 kN, Sample Diameter 5 – 22 mmDeformed Bar: Maximum Load 500 kN, Sample Diameter 5 – 40 mm2. Relaxation Testing MachineTesting Standards Supported: AS/NZS 4672.1, AS/NZS 4672.2, ASTM A416/A416M, ASTM A421/A421M, ASTM A881, BS 5896, ISO 15630-3, JIS G3536, TIS 95-2540, TIS 420-2540PC Wire: Maximum Load 300 kN, Sample Diameter 4 – 9 mmPC Strand: Maximum Load 500 kN, Sample Diameter 9.3 – 18.0 mm
07-07-2025
A Closer Look at “Thai vs Japanese Structures” – Essential Knowledge for Earthquake-Resistant Design.🎁 Special Giveaway!Like + Share this post for a chance to win exciting prizes!📍 [Live Session]🕑 Starts at 2:00 PM | Tuesday, July 8, 2025Watch live on: Facebook: https://www.facebook.com/share/v/1Awmf5PaeK/ YouTube: https://youtube.com/live/P3cKiPsbqo8?feature=share Join the conversation and dive into construction standards with earthquake engineering expert:Professor Dr. Panuwat JoykladDepartment of Civil and Environmental Engineering,Faculty of Engineering, Srinakharinwirot University #SIW #EarthquakeResistantStructures
11-11-2022
เพราะเหตุใดงานเสาเข็มของ บี.เค.เค.ไพล์ลิ่ง ถึงโดดเด่นไม่เหมือนใคร? หาคำตอบกันได้ในคลิปนี้ ขอขอบคุณ คุณทรงวุฒิ แจ้งประสิทธิ์ (กรรมการผู้จัดการบริษัท บี.เค.เค.ไพล์ลิ่ง จำกัด) ที่ให้ความเชื่อมั่นและไว้วางใจผลิตภัณฑ์ของ บริษัท สยามลวดเหล็กฯ มายาวนานกว่า 10 ปี
04-12-2024
Concrete Roads vs. Asphalt Roads: Which is Better? Selecting the right material for road construction is a critical decision that influences performance, longevity, and overall cost. Concrete and asphalt are the two primary options, each with distinct advantages and limitations. The key is to choose the material that best aligns with the intended application and environmental conditions. Asphalt Roads Asphalt roads are known for their flexibility and smooth surface, offering a more comfortable driving experience. However, they are vulnerable to weather conditions, such as extreme heat or heavy rain, which accelerates deterioration. Typically, asphalt roads have an average lifespan of 10–15 years, making them suitable for general use and smaller projects. Advantages • Lower initial construction costs. • Quick construction time; roads can be used immediately after the asphalt is laid. • Simple and fast maintenance using resurfacing techniques (re-paving the road surface). Disadvantages • Faster degradation compared to concrete, particularly in areas with high temperatures or frequent flooding. • High maintenance costs due to the need for frequent repairs. Concrete Roads Concrete roads consist of a mixture of cement, stone, sand, and reinforcement materials such as wire mesh, which enhance strength and durability. With an average lifespan of 20–40 years, concrete roads are ideal for large-scale projects and infrastructure that must withstand heavy loads, such as highways, bridges, and industrial zones. Advantages • Superior strength and durability, capable of handling heavy loads effectively. • Stable and smooth surface, with reduced risk of subsidence over time. • Long-term cost-efficiency due to lower maintenance requirements. Disadvantages • Higher initial construction costs. • Longer construction times, as the concrete must cure and gain strength before use. • Complex and costly maintenance processes for repairs. Deciding between concrete and asphalt roads requires careful consideration of factors such as usage, budget, and environmental conditions. By aligning these factors with the project’s objectives, you can ensure the road meets its intended purpose effectively. Siam Industrial Wire offers premium-quality wire mesh steel grids tailored for concrete road and flooring applications. These products are manufactured in compliance with Thai Industrial Standards (TIS) and certified by the Thai Industrial Standards Institute (TISI). The offerings include TIS 737 for standard applications and TIS 926 for cane and rubber-specific uses, ensuring superior quality and performance. Wire Mesh : https://www.siw.co.th/th/product-detail/wire-mesh
We are relentless in our pursuit for excellence in product quality and innovation. We take pride in being able to anticipate your needs and provide tailored solutions for each of your requirements. We strive to exceed expectations.